Display - cleanup and better "example"

* Moved test pattern to main program
* Use the touchscreen to affect display brightness

07-BitBangDisplay/Makefile

@@ -1,6 +1,7 @@
 PROJECT = BitBangDisplay
 PRJ_C_SRC = main.c \
-	    ssd1963.c
+	    ssd1963.c \
+	    xpt2046.c
 
 ##############################################################################
 # Build global options

07-BitBangDisplay/main.c

@@ -2,6 +2,7 @@
 #include "hal.h"
 
 #include "ssd1963.h"
+#include "xpt2046.h"
 
 // This is called when the board boots up with the user button pressed. The
 // idea is to enter this mode if the wrong SPI device has been used and flashing
@@ -16,8 +17,88 @@ static void lockdown( void )
 }
 
 
-void display_off( void );
+static void displayTestPattern( u16 start_mask )
-void display_test_pattern( u16 start_mask );
+{
+	_ssd1963_clear_cs;
+	ssd1963StartWriting( 0 , 0 );
+	int i;
+	for ( i = 0 ; i < SSD1963_SCR_HEIGHT ; i ++ ) {
+		u16 j , c = start_mask;
+		for ( j = 0 ; j < SSD1963_SCR_WIDTH ; j ++ ) {
+			if ( ( j & 7 ) == 7 ) {
+				c >>= 1;
+				if ( !c ) {
+					c = 0x8000;
+				}
+			}
+			ssd1963WriteData( c );
+		}
+	}
+	_ssd1963_set_cs;
+}
+
+
+static int tryReading;
+
+static void onTouchscreenIRQ( EXTDriver * driver __attribute__((unused)) ,
+		expchannel_t channel __attribute__((unused)) )
+{
+	tryReading = TRUE;
+}
+
+
+#define PORT(P) \
+	case (int) GPIO##P : \
+		port = EXT_MODE_GPIO##P; \
+		break;
+
+static void initIRQs( void )
+{
+	EXTConfig config;
+	u32 i;
+
+	for ( i = 0 ; i < EXT_MAX_CHANNELS ; i ++ ) {
+		if ( i == XPT2046_IRQ_PAD ) {
+			int port;
+			switch ( (int) XPT2046_IRQ_PORT ) {
+				default: PORT(A); PORT(B);
+				PORT(C); PORT(D); PORT(E);
+				PORT(F); PORT(G); PORT(H);
+			}
+			config.channels[ i ].mode = EXT_CH_MODE_FALLING_EDGE
+				| EXT_CH_MODE_AUTOSTART | port;
+			config.channels[ i ].cb = &onTouchscreenIRQ;
+		} else {
+			config.channels[ i ].mode = EXT_CH_MODE_DISABLED;
+			config.channels[ i ].cb = NULL;
+		}
+	}
+	extStart( &EXTD1 , &config );
+}
+
+
+static void checkTouchScreen( void )
+{
+	int x , y;
+	if ( ! xpt2046GetAverageCoordinates( &x , &y , 3 ) ) {
+		return;
+	}
+
+	x >>= 8;
+
+	_ssd1963_clear_cs;
+	ssd1963WriteCommand( SSD1963_CMD_SET_POST_PROC );
+	ssd1963WriteData( 0x40 );
+	ssd1963WriteData( x );
+	ssd1963WriteData( 0x40 );
+	if ( y > 2048 ) {
+		ssd1963WriteData( 0 );
+	} else {
+		ssd1963WriteData( 1 );
+	}
+	_ssd1963_set_cs;
+}
+
 
 int main( void )
 {
@@ -27,14 +108,18 @@ int main( void )
 		lockdown( );
 	}
 
+	xpt2046Init( );
+	initIRQs();
 	ssd1963Init( );
 
 	int i = 0;
 	while (TRUE) {
-		display_test_pattern( 1 << i );
+		displayTestPattern( 1 << i );
+		chThdSleep(100);
 		i = ( i + 1 ) % 16;
-		if ( palReadPad( GPIOA , GPIOA_BUTTON ) ) {
+		if ( tryReading ) {
-			display_off( );
+			checkTouchScreen( );
+			tryReading = FALSE;
 		}
 	}
 }

07-BitBangDisplay/ssd1963.c

@@ -4,66 +4,43 @@
 #include "ssd1963.h"
 
 
-#define _command 0x40
-#define _delay 0x80
-#define _ndata(x) ( (u8)( (x) & 0x3f) )
-
 static const u8 _ssd1963_reset_sequence[ ] = {
-	/*
+	// PLL configuration
-	 * PLL configuration
+	SSD1963_COMMAND | SSD1963_DATA(3) ,
-	 * -----------------
-	 *
-	 * PLL = input * ( P1 + 1 ) / ( P2 + 1 )
-	 *	(P1 : 8 bits ; P2 : 4 bits; P3 : junk)
-	 *
-	 * 1/ The ITDB02-4.3 board has a 12MHz crystal (which contradicts the
-	 * SSD1963 datasheet - wtf?).
-	 * 2/ The SSD1963 must be clocked at *at most* 110MHz.
-	 * 3/ Also, 250MHz < input * ( P1 + 1 ) < 800MHz
-	 * 4/ The STM32F4 can communicate at 50MHz.
-	 * 5/ The SSD1963 accepts PLL/2 accesses per second.
-	 *
-	 * 100MHz = 12MHz * ( P1 + 1 ) / ( P2 + 1 )
-	 * 	=> P1 = 49, P2 = 5
-	 * 100MHz = 10MHz * ( P1 + 1 ) / ( P2 + 1 )
-	 * 	=> P1 = 19, P2 = 1
-	 */
-	_command | _ndata(3) ,
 		SSD1963_CMD_SET_PLL_MN ,
-		0x31 , 0x05 , 0x04 ,
+		0x1e , 0x02 , 0x04 ,
-//		0x1e , 0x02 , 0x04 ,
 
 	// Enable PLL and wait until it's stable
-	_command | _delay | _ndata(1) ,
+	SSD1963_COMMAND | SSD1963_DELAY | SSD1963_DATA(1) ,
 		SSD1963_CMD_SET_PLL , 1 ,
 		1 ,
 
 	// Fully enable PLL
-	_command | _ndata(1) ,
+	SSD1963_COMMAND | SSD1963_DATA(1) ,
 		SSD1963_CMD_SET_PLL , 3 ,
 };
 
 
 static const u8 _ssd1963_init_sequence[ ] = {
 	// Software reset
-	_command | _delay ,
+	SSD1963_COMMAND | SSD1963_DELAY ,
 		SSD1963_CMD_SOFT_RESET ,
 		5 ,
 
-	/* Pixel clock: screw finesse, crank that up to the max */
+	// Pixel clock: screw finesse, crank that up to the max
-	_command | _ndata( 3 ) | _delay ,
+	SSD1963_COMMAND | SSD1963_DATA( 3 ) | SSD1963_DELAY ,
 		SSD1963_CMD_SET_LSHIFT_FREQ ,
 		0x07 , 0xff , 0xff ,
 		15 ,
 
 	// Use 565 RGB format
-	_command | _delay | _ndata(1) ,
+	SSD1963_COMMAND | SSD1963_DELAY | SSD1963_DATA(1) ,
 		SSD1963_CMD_SET_PIXEL_FORMAT ,
 		0x03 ,
 		5 ,
 
 	// Setup LCD panel
-	_command | _ndata( 7 ) ,
+	SSD1963_COMMAND | SSD1963_DATA( 7 ) ,
 		SSD1963_CMD_SET_LCD_MODE ,
 		0x20 ,	// Data width 24-bit, FRC and dithering disabled
 			// Data latch on falling edge
@@ -78,7 +55,7 @@ static const u8 _ssd1963_init_sequence[ ] = {
 		( ( SSD1963_SCR_HEIGHT - 1 ) & 0xff ) ,
 		0x00 , // Ignored (serial interface)
 
-	_command | _ndata( 8 ) ,
+	SSD1963_COMMAND | SSD1963_DATA( 8 ) ,
 		SSD1963_CMD_SET_HORI_PERIOD ,
 		0x02 , 0x13 ,	// Total period (PCLK)
 		0x00 , 0x08 ,	// Non-display period
@@ -86,86 +63,35 @@ static const u8 _ssd1963_init_sequence[ ] = {
 		0x00 , 0x02 ,	// Start location (PCLK)
 		0x00 ,		// Ignored (serial interfaces)
 
-	_command | _ndata( 7 ) ,
+	SSD1963_COMMAND | SSD1963_DATA( 7 ) ,
 		SSD1963_CMD_SET_VERT_PERIOD ,
 		0x01 , 0x20 ,	// Vertical total period
 		0x00 , 0x04 ,	// Non-display period
 		0x0c ,		// Sync pulse width
 		0x00 , 0x02 ,	// Start location
 
-	_command | _ndata(1) ,
+	SSD1963_COMMAND | SSD1963_DATA(1) ,
-		0x36 ,
+		SSD1963_CMD_SET_ADDRESS_MODE ,
-		0x00 ,
+		0x00 ,		// Top to bottom, left to right, no reversing,
+				// RGB framebuffer, LCD l-to-r refresh, no
+				// flipping
 
-	_command ,
+	// TE signal is not connected on the ITDB02-4.3
-		SSD1963_CMD_SET_DISPLAY_ON ,
+	SSD1963_COMMAND ,
-
-	_command | _ndata(6) ,
-		SSD1963_CMD_SET_PWM_CONF ,
-		0x06 , 0xf0 , 0x01 , 0xf0 , 0 , 0 ,
-
-	_command | _ndata(1) ,
-		0xd0 ,
-		0x0d ,
-
-	_command | _ndata(1) , SSD1963_CMD_SET_GAMMA_CURVE, 1 ,
-	//_command | SSD1963_CMD_ENTER_NORMAL_MODE ,
-	//_command | SSD1963_CMD_EXIT_INVERT_MODE ,
-	_command , SSD1963_CMD_EXIT_IDLE_MODE ,
-/*
 		SSD1963_CMD_SET_TEAR_OFF ,
-*/
+
+	// Set standard gamma curve
+	SSD1963_COMMAND | SSD1963_DATA(1) ,
+		SSD1963_CMD_SET_GAMMA_CURVE ,
+		1 ,
+
+	// Enable display
+	SSD1963_COMMAND ,
+		SSD1963_CMD_SET_DISPLAY_ON ,
 };
 
 
-#define _ssd1963_wcmd(command) \
+static void _ssd1963_reset_chip( void )
-	do { \
-		_ssd1963_clear_rs; \
-		_ssd1963_write( command ); \
-		_ssd1963_clear_wr; \
-		_ssd1963_set_wr; \
-	} while ( FALSE )
-#define _ssd1963_wdata(data) \
-	do { \
-		_ssd1963_set_rs; \
-		_ssd1963_write( data ); \
-		_ssd1963_clear_wr; \
-		_ssd1963_set_wr; \
-	} while ( FALSE )
-
-
-void _ssd1963_run_sequence( const u8 * sequence , u32 size )
-{
-	_ssd1963_clear_cs;
-
-	u32 addr = 0;
-	u8 has_command = 0 , has_data = 0 , has_delay = 0;
-	while ( addr < size ) {
-		if ( has_command ) {
-			u16 command = sequence[ addr ++ ];
-			_ssd1963_wcmd( command );
-			has_command = 0;
-		} else if ( has_data ) {
-			u16 data = sequence[ addr ++ ];
-			_ssd1963_wdata( data );
-			has_data --;
-		} else if ( has_delay ) {
-			u8 delay = sequence[ addr ++ ];
-			chThdSleep( delay );
-			has_delay = 0;
-		} else {
-			u8 value = sequence[ addr ++ ];
-			has_command = ( ( value & _command ) == _command );
-			has_delay = ( ( value & _delay ) == _delay );
-			has_data = value & ~( _command | _delay );
-		}
-	}
-
-	_ssd1963_set_cs;
-}
-
-
-void _ssd1963_reset_chip( void )
 {
 	// Select and reset the chip
 	_ssd1963_set_reset;
@@ -178,29 +104,12 @@ void _ssd1963_reset_chip( void )
 	chThdSleep( 100 );
 
 	// Run the PLL init sequence
-	_ssd1963_run_sequence( _ssd1963_reset_sequence ,
+	ssd1963RunSequence( _ssd1963_reset_sequence ,
 			sizeof( _ssd1963_reset_sequence ) );
 }
 
 
 
-void _ssd1963_set_pos( u32 x , u32 y )
-{
-	_ssd1963_wcmd( 0x2a );
-	_ssd1963_wdata( x >> 8 );
-	_ssd1963_wdata( x & 0xff );
-	_ssd1963_wdata( ( ( SSD1963_SCR_WIDTH - 1 ) >> 8 ) & 0xff );
-	_ssd1963_wdata( ( SSD1963_SCR_WIDTH - 1 ) & 0xff );
-	_ssd1963_wcmd( 0x2b );
-	_ssd1963_wdata( y >> 8 );
-	_ssd1963_wdata( y & 0xff );
-	_ssd1963_wdata( ( ( SSD1963_SCR_HEIGHT - 1 ) >> 8 ) & 0xff );
-	_ssd1963_wdata( ( SSD1963_SCR_HEIGHT - 1 ) & 0xff );
-	_ssd1963_wcmd( 0x2c ); 
-}
-
-
-
 void ssd1963Init( void )
 {
 	_ssd1963_init_gpio( PAL_STM32_OSPEED_LOWEST );
@@ -209,58 +118,63 @@ void ssd1963Init( void )
 
 	chThdSleep( 10 );
 	_ssd1963_init_gpio( PAL_STM32_OSPEED_HIGHEST );
-	_ssd1963_run_sequence( _ssd1963_init_sequence ,
+	ssd1963RunSequence( _ssd1963_init_sequence ,
 			sizeof( _ssd1963_init_sequence ) );
 
 	_ssd1963_clear_cs;
-	_ssd1963_set_pos( 0 , 0 );
+	ssd1963StartWriting( 0 , 0 );
 	int i;
-	for ( i = 0 ; i < SSD1963_SCR_HEIGHT ; i ++ ) {
+	for ( i = 0 ; i < SSD1963_SCR_HEIGHT * SSD1963_SCR_WIDTH ; i ++ ) {
-		u16 j , c = 0x8000;
+		ssd1963WriteData( 0 );
-		for ( j = 0 ; j < SSD1963_SCR_WIDTH ; j ++ ) {
-			if ( ( j & 7 ) == 7 ) {
-				c >>= 1;
-				if ( !c ) {
-					c = 0x8000;
-				}
-			}
-			_ssd1963_wdata( c );
-		}
 	}
 	_ssd1963_set_cs;
 }
 
 
-void display_test_pattern( u16 start_mask )
+void ssd1963RunSequence( const u8 * sequence , u32 size )
 {
 	_ssd1963_clear_cs;
-	_ssd1963_set_pos( 0 , 0 );
-	int i;
-	for ( i = 0 ; i < SSD1963_SCR_HEIGHT ; i ++ ) {
-		u16 j , c = start_mask;
-		for ( j = 0 ; j < SSD1963_SCR_WIDTH ; j ++ ) {
-			if ( ( j & 7 ) == 7 ) {
-				c >>= 1;
-				if ( !c ) {
-					c = 0x8000;
-				}
-			}
-			_ssd1963_wdata( c );
-		}
-	}
-	_ssd1963_set_cs;
-}
 
-
+	u32 addr = 0;
-void display_off( void )
+	u8 has_command = 0 , has_data = 0 , has_delay = 0;
-{
+	while ( addr < size ) {
-	static int display = 1;
+		if ( has_command ) {
-	display = !display;
+			u16 command = sequence[ addr ++ ];
-	_ssd1963_clear_cs;
+			ssd1963WriteCommand( command );
-	if ( display ) {
+			has_command = 0;
-		_ssd1963_wcmd( SSD1963_CMD_SET_DISPLAY_ON );
+		} else if ( has_data ) {
+			u16 data = sequence[ addr ++ ];
+			ssd1963WriteData( data );
+			has_data --;
+		} else if ( has_delay ) {
+			u8 delay = sequence[ addr ++ ];
+			chThdSleep( delay );
+			has_delay = 0;
 		} else {
-		_ssd1963_wcmd( SSD1963_CMD_SET_DISPLAY_OFF );
+			u8 value = sequence[ addr ++ ];
+			has_command = ( ( value & SSD1963_COMMAND )
+					== SSD1963_COMMAND );
+			has_delay = ( ( value & SSD1963_DELAY )
+					== SSD1963_DELAY );
+			has_data = value & ~( SSD1963_COMMAND | SSD1963_DELAY );
 		}
+	}
+
 	_ssd1963_set_cs;
 }
+
+
+void ssd1963StartWriting( u32 x , u32 y )
+{
+	ssd1963WriteCommand( 0x2a );
+	ssd1963WriteData( x >> 8 );
+	ssd1963WriteData( x & 0xff );
+	ssd1963WriteData( ( ( SSD1963_SCR_WIDTH - 1 ) >> 8 ) & 0xff );
+	ssd1963WriteData( ( SSD1963_SCR_WIDTH - 1 ) & 0xff );
+	ssd1963WriteCommand( 0x2b );
+	ssd1963WriteData( y >> 8 );
+	ssd1963WriteData( y & 0xff );
+	ssd1963WriteData( ( ( SSD1963_SCR_HEIGHT - 1 ) >> 8 ) & 0xff );
+	ssd1963WriteData( ( SSD1963_SCR_HEIGHT - 1 ) & 0xff );
+	ssd1963WriteCommand( 0x2c ); 
+}

07-BitBangDisplay/ssd1963.h

@@ -21,6 +21,7 @@
 #define SSD1963_CMD_SET_DISPLAY_OFF	0x28
 #define SSD1963_CMD_SET_DISPLAY_ON	0x29
 #define SSD1963_CMD_SET_TEAR_OFF	0x34
+#define SSD1963_CMD_SET_ADDRESS_MODE	0x36
 #define SSD1963_CMD_EXIT_IDLE_MODE	0x38
 #define SSD1963_CMD_SET_LCD_MODE	0xb0
 #define SSD1963_CMD_SET_HORI_PERIOD	0xb4
@@ -34,15 +35,40 @@
 #define SSD1963_CMD_SET_PIXEL_FORMAT	0xf0
 
 
-
+// Command sequences
-// Control and data ports
+#define SSD1963_DATA(x)		( (u8)( (x) & 0x3f) )
-#define ssd1963Ctrl	(*((__IO u16 *) 0x60000000))
+#define SSD1963_COMMAND		0x40
-#define ssd1963Data	(*((__IO u16 *) 0x60020000))
+#define SSD1963_DELAY		0x80
-
 
 
 // Initialise the display controller
 void ssd1963Init( void );
 
+// Execute a sequence of commands from the specified address
+void ssd1963RunSequence( const u8 * sequence , u32 size );
+
+
+// Write a command to the SSD1963
+#define ssd1963WriteCommand(command) \
+	do { \
+		_ssd1963_clear_rs; \
+		_ssd1963_write( command ); \
+		_ssd1963_clear_wr; \
+		_ssd1963_set_wr; \
+	} while ( FALSE )
+
+// Write data to the SSD1963
+#define ssd1963WriteData(data) \
+	do { \
+		_ssd1963_set_rs; \
+		_ssd1963_write( data ); \
+		_ssd1963_clear_wr; \
+		_ssd1963_set_wr; \
+	} while ( FALSE )
+
+
+// Start writing data at the specified location
+void ssd1963StartWriting( u32 x , u32 y );
+
 
 #endif // _H_SSD1963_STM32F4

07-BitBangDisplay/xpt2046.c

@@ -0,0 +1,125 @@
+#include "ch.h"
+#include "hal.h"
+
+#include "xpt2046.h"
+
+static const SPIConfig _xpt2046_spi_config = {
+	NULL ,
+	XPT2046_NSS_PORT ,
+	XPT2046_NSS_PAD ,
+	SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0
+};
+
+
+
+u16 _xpt2046_get_reading( u8 control )
+{
+	u8 tData[3] = { control , 0 , 0 };
+	u8 rData[3] = { 0 , 0 , 0 };
+
+#if SPI_USE_MUTUAL_EXCLUSION
+	spiAcquireBus( &( XPT2046_SPI_DRIVER ) );
+#endif
+
+	palClearPad( XPT2046_NSS_PORT , XPT2046_NSS_PAD );
+	spiExchange( &( XPT2046_SPI_DRIVER ) , 3 , tData , rData );
+	palSetPad( XPT2046_NSS_PORT , XPT2046_NSS_PAD );
+
+#if SPI_USE_MUTUAL_EXCLUSION
+	spiReleaseBus( &( XPT2046_SPI_DRIVER ) );
+#endif
+
+	if ( ( control & 0x08 ) == 0 ) {
+		return ( rData[1] << 5 ) | ( rData[2] >> 3 );
+	}
+	return ( rData[1] << 4 ) | ( rData[2] >> 4 );
+}
+
+
+
+void xpt2046Init( void )
+{
+	// Initialise SPI
+	spiStart( &( XPT2046_SPI_DRIVER ) , &_xpt2046_spi_config );
+
+	// NSS signal
+	palSetPadMode( XPT2046_NSS_PORT , XPT2046_NSS_PAD ,
+			PAL_MODE_OUTPUT_PUSHPULL );
+	palSetPad( XPT2046_NSS_PORT , XPT2046_NSS_PAD );
+
+	// Main SPI signals
+	palSetPadMode( XPT2046_CLK_PORT , XPT2046_CLK_PAD ,
+			PAL_MODE_ALTERNATE( 5 ) );
+	palSetPadMode( XPT2046_DIN_PORT , XPT2046_DIN_PAD ,
+			PAL_MODE_ALTERNATE( 5 ) );
+	palSetPadMode( XPT2046_DOUT_PORT , XPT2046_DOUT_PAD ,
+			PAL_MODE_ALTERNATE( 5 ) );
+
+	// PENIRQ signal
+	palSetPadMode( XPT2046_IRQ_PORT , XPT2046_IRQ_PAD , PAL_MODE_INPUT );
+
+	// Read a sample, leaving PENIRQ active
+	_xpt2046_get_reading( 0x90 );
+}
+
+
+int xpt2046GetCoordinates( int * pX , int * pY )
+{
+	int i;
+	int allX[ 7 ] , allY[ 7 ];
+	_xpt2046_get_reading( 0xd1 );
+	_xpt2046_get_reading( 0x91 );
+	for ( i = 0 ; i < 7 ; i ++ ) {
+		allX[ i ] = _xpt2046_get_reading( 0xd1 );
+		allY[ i ] = _xpt2046_get_reading( 0x91 );
+	}
+
+	int j;
+	for ( i = 0 ; i < 4 ; i ++ ) {
+		for ( j = i ; j < 7 ; j ++ ) {
+			int temp = allX[ i ];
+			if ( temp > allX[ j ] ) {
+				allX[ i ] = allX[ j ];
+				allX[ j ] = temp;
+			}
+			temp = allY[ i ];
+			if ( temp > allY[ j ] ) {
+				allY[ i ] = allY[ j ];
+				allY[ j ] = temp;
+			}
+		}
+	}
+	_xpt2046_get_reading( 0x90 );
+
+	if ( palReadPad( XPT2046_IRQ_PORT , XPT2046_IRQ_PAD ) ) {
+		return 0;
+	}
+
+	*pX = allX[ 3 ];
+	*pY = allY[ 3 ];
+
+	return 1;
+}
+
+int xpt2046GetAverageCoordinates( int * pX , int * pY , int nSamples )
+{
+	int nRead = 0;
+	int xAcc = 0 , yAcc = 0;
+	int x , y;
+
+	while ( nRead < nSamples ) {
+		if ( !xpt2046GetCoordinates( &x , &y ) ) {
+			break;
+		}
+		xAcc += x;
+		yAcc += y;
+		nRead ++;
+	}
+
+	if ( nRead == 0 ) {
+		return 0;
+	}
+	*pX = xAcc / nRead;
+	*pY = yAcc / nRead;
+	return 1;
+}

07-BitBangDisplay/xpt2046.h

@@ -0,0 +1,31 @@
+#ifndef _H_XPT2046_STM32F4
+#define _H_XPT2046_STM32F4
+
+
+// Ports and controllers for the various touchscreen pins
+//	IRQ	(any port will do)
+#define XPT2046_IRQ_PORT	GPIOC
+#define XPT2046_IRQ_PAD		4
+//	NSS	(any port will do, this is done manually)
+#define XPT2046_NSS_PORT	GPIOA
+#define XPT2046_NSS_PAD		4
+//	CLK	(must be a SPI clock port)
+#define XPT2046_CLK_PORT	GPIOA
+#define XPT2046_CLK_PAD		5
+//	DIN	(must be a SPI MOSI port)
+#define XPT2046_DIN_PORT	GPIOA
+#define XPT2046_DIN_PAD		7
+//	DOUT	(must be a SPI MISO port)
+#define XPT2046_DOUT_PORT	GPIOA
+#define XPT2046_DOUT_PAD	6
+
+// SPI driver to use
+#define XPT2046_SPI_DRIVER	SPID1
+
+
+void xpt2046Init( void );
+int xpt2046GetCoordinates( int * pX , int * pY );
+int xpt2046GetAverageCoordinates( int * pX , int * pY , int nSamples );
+
+
+#endif //_H_XPT2046_STM32F4