README - Section about check_zone_serial

This commit is contained in:
Emmanuel BENOîT 2021-02-27 11:33:28 +01:00
parent f67dd244a4
commit 26ac3da54a

View file

@ -33,3 +33,19 @@ supports the following command-line flags:
that the certificate should also have. that the certificate should also have.
* `-s protocol`/`--start-tls protocol`: protocol to use before requesting a * `-s protocol`/`--start-tls protocol`: protocol to use before requesting a
switch to TLS. Supported protocols: `smtp`, `sieve`. switch to TLS. Supported protocols: `smtp`, `sieve`.
### DNS zone serials
The `check_zone_serial` plugin can be used to check that the version of a
zone served by a DNS is up-to-date compared to the same zone served by
another, "reference" DNS. It supports the following command-line flags:
* `-H name`/`--hostname name`: the host name or address of the server to
check.
* `-P port`/`--port port`: the port to use on the server to check (defaults
to 53).
* `-z zone`: the zone to check.
* `-r name`/`--rs-hostname name`: the host name or address of the reference
server.
* `-p port`/`--rs-port port`: the port to use on the reference server
(defaults to 53).